 |
. |
125Khz |
13.56Mhz |
915Mhz |
2.45Ghz |
2.4GHz Active Tag
The Microwave 2.4GHz Active Tag is used to identify and/or perform micro-localization of items or persons; it is built around innovative 0.18 um low-power CMOS integrated circuits. This high scale of integration allows for very compact and low-power performance .The unique more than 4 years battery lifetime is achieved without sacrificing the reading range.
|
|
|
|
| Addressed Tag |
Temperature Sensor Tag |
Active Tag |
Vibration Sensor Tag |
R24TAG02CS |
R24TAG01BT |
R24TAG01AS |
R24TAG01BS/BV |
51*26*8.4mm |
|
85.5*54*4mm |
|
Specifications:
Range: 0~100 m
Frequency: 2.4GHz――2.5GHz ISM
RF Output Power: 0dBm
Power: 12～18ｕA，3V
Modulation: GFSK
Data Rate: 1Mbps
Anti-collision: 100 tags are read simultaneously
Operation: Read only
Battery Life: 4 years
Typical Application: Individual Locating,Logistics, Warehouse Management |
2.4GHz USB Interface Reader |
|
USB Portable Reader
USB Portable Reader is connected with computer for data exchange by USB interface. Its low cost, reliable performance makes it predominant in Movable Identification. The USB2.0 interface is suitable for Intelligent Phone, PDA, Portable Computer and other devices that adopt USB interface. Its Omni-directional antenna can identify and track items from all directions.
Specifications:
Direction: Omni directional, sheet antenna
Range: 0~30 m
Frequency: 2.4GHz――2.5GHz ISM
RF Output Power: 0dBm
Sensitivity: －90dBm
Modulation: GFSK
Mode: Direct Mode
Data Rate: 1Mbps
Operating Temperature: －40～80 ℃
Operating Humidity: 95％ （Non-condensing）
Anti-collision: read 100 tags simultaneously
Interface: USB2.0
Typical Application: Movable Identification |
RDM051 |
68*20*8mm |
|
2.4GHz Reader
Specifications:
Direction: Omni-directional, standard λ/4 rubber antenna
Range: 0~100 m adjustable
Frequency: 2.4GHz――2.5GHz ISM
RF Output Power: 0dBm
Sensitivity: －90dBm
Power: 50mA，9V
Modulation: GFSK
Mode: Direct Mode and Buffering Mode. In direct mode, readers upload messages to controller once received from tags. In buffering mode, readers receive and save messages, which upload only when controller order to collect data.
Buff Capacity: 800 latest messages
Data Rate: 1Mbps
Operating Temperature: －40～80 ℃
Operating Humidity: 95％（Non-condensing）
Anti-collision: Read 100 tags simultaneously
Interface: RS232/485, TCP/IP, WI-FI, ZIGBEE
Typical Application: Individual Locating, Logistics, Warehouse Management
|
2.4GHz Gain Adjustable Reader
2.4GHz Gain Adjustable Reader adopts the advanced 0.18um CMOS IC, its ultra-low power consumption design allows it into flammable and explosive high-risk circumstances, like the gas station, chemical factory, etc.. Various interfaces make it suitable for different layouts from the simple tree network to the complex group network. Its Omni-directional antenna can identify and track items from all directions. Users can adjust the identification distance according to actual situations in order to make identification more accurate. |
RDM021 |
126*104*28mm |
| |
|
Industrial Reader with CAN-bus
Industrial Reader with CAN-bus caters for high risk circumstances and explosive and flammable environment. The product adopts CAN-bus to form tree network with high data rate and long communication range. Besides, the ultra-low power makes itself completely suitable for gas station, chemical factory and coal mine etc. |
RDM011 |
160*110*57mm |
|
RFID Reader with Light & Sound Alarm
Besides basic function of TCP/IP reader, it’s added blacklisted alarm function; with sound and light alarm, the reader can identify items Omni directionally.
The blacklist helps to distinguish the item’s identification and judge the legal activity area. With such alarm function, it possesses tremendous advantages in Person Control or special area. |
RDM031 |
160.5mm *80.5mm *55mm |
|
